Software release

• Junos OS release 17.3R1 and later

Description

• Weight: 30 lb (13.61 kg) (net weight without blank panel and without any MIC in slot 1)

• Model number: MX10003-LC2103

• Power requirement:

  715 W at 55° C

  660 W at 25° C

• Name in the CLI: LC2103

Hardware features

• The MX10003 MPC is a 1.2-Terabit capable MPC with three Packet Forwarding Engine complexes (that is, three EA ASICs). The EA ASIC operates in 400G mode.

• The Packet Forwarding Engine is based on the third generation of the Trio chpiset architecture—namely, the EA (Eagle) ASIC. The Packet Forwarding Engine offers 400 Gbps of WAN and fabric bandwidth each.

• MX10003 MPC has six built-in QSFP+ optics ports, and one MIC slot.

• Supports Multi-Rate Ethernet Modular Interface Card (MIC) (model numbers: JNP-MIC1 and JNP-MIC1-MACSEC), and the fixed-port PIC (6xQSFPP). For information about which MICs are supported on this MPC, see MIC/MPC Compatibility.

• Supports maximum transmission units (MTUs) from 256 bytes through 16,000 bytes for transit traffic, and from 256 bytes through 9,500 bytes for host bound packets.

Software features

• Dynamic Power Management for effective utilization of available power.

• Inline Active Flow Monitoring for higher scalability and performance.

• Flexible Queuing Mode to support 32,000 queues per line card, including queues on both ingress and egress interfaces. Supports up to 512,000 queues per slot or 768,000 queues per slot.

• Hyper Mode to speed up packet processing.

• Optical diagnostics and related alarms.

For more information about features supported on MX10003 MPC, see Protocols and Applications Supported by the MX10003 MPC (Multi-Rate) on the MX10003 Router.

Cables and connectors

The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.

Power requirements

(without MICs)

• At different temperatures:

  55° C: 715 W

  25° C: 660 W

LEDs

OK/FAIL LED, one bicolor:

• Steady green—MPC is functioning normally and the link is up.

• Off—MPC is plugged-in but not powered on.

• Red—MPC has failed.

For information on the lane LEDs (Lo, L1, L2, and L3), see MPC and MIC Lane LED Scheme Overview.