Software release
|
-
Junos OS releases 14.1R4, 14.2R3 and Junos Continuity, Junos OS release 15.1 and later.
-
Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC.
-
Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases.
|
Description
|
-
80 Gbps capacity with hierarchical quality of service (HQoS)
-
Requires high-capacity fan trays and high capacity filter trays
-
Weight: 15.96 lb (7.26 kg)
-
Model number: MPC2E-3D-NG-Q
-
Name in the CLI: MPC2E NG HQoS
NOTE:
MPC2E-3D-NG-Q is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface.
|
Hardware features
|
-
Line-rate throughput of up to 80 Gbps
-
Supports up to 512,000 queues per slot
-
Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY mode at 10.31 Gbps
-
Two slots for MICs
-
Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services.
NOTE:
The MPC2E-3D-NG-Q has only one lookup chip (LU).
NOTE:
MPC2E-3D-NG-Q does not support MIC3-3D-10XGE-SFPP, MIC3-3D-1X100GE-CFP, MIC3-3D-1X100GE-CXP, and MIC3-3D-2X40GE-QSFPP.
|
Software features
|
-
Chained composite next hops
-
Layer 3 VPN localization
-
Detection of Layer 2 loops
-
Entropy label support in mixed mode
-
SNMP and CLI support for Routing Engine memory monitoring
-
BFD support for inline MLPPP/MLFR
-
Mixed Mode LAG support on core interfaces
-
Dynamic power management for MICs
-
See Protocols and Applications Supported by the MX240, MX480, MX960, MX2010, and MX2020 MPC2E for information about the protocols and applications that this MPC supports.
|
Power requirement
|
Maximum with highest-power MICs at 55° C: 11.02 A @ 48 V (529 W)
At different temperatures:
-
55° C: 529 W
-
40° C: 460 W
-
25° C: 438 W
|
LEDs
|
OK/FAIL LED, one bicolor:
|