HPE Aruba Networking 400G DR4 QSFP‑DD MPO12 500m SMF Transceiver
Description | SKU |
| |
10G Transceivers | |
HPE 10GBASE-T SFP+ RJ45 30m 1-pack Transceiver | R0R41B |
HPE 10GbE SFP+ SR Multi-mode 300m Transceiver | Q6M30A |
25G Transceivers and Cables |
|
HPE 25Gb SFP28 Short Wave Extended Temperature 1-pack Pull Tab Optical Transceiver | Q2P64B |
HPE 25Gb SFP28 SR 30m Transceiver | R0R42A |
HPE 25GbE SFP28 to SFP28 3m Smart Active Optical Cable | Q9S67A |
HPE 25GbE SFP28 to SFP28 5m Smart Active Optical Cable | Q9S68A |
HPE 25GbE SFP28 to SFP28 10m Smart Active Optical Cable | Q9S69A |
HPE 25GbE SFP28 to SFP28 15m Smart Active Optical Cable | Q9S70A |
HPE 25/50GbE SFP56 SR 100m 1-pack Transceiver | R8M65A |
40G Transceivers and Cables |
|
HPE 40GbE QSFP+ to 4x10GbE SFP+ 5m Active Optical Cable | Q9S66A |
100G Transceivers and Cables |
|
HPE 100GbE QSFP28 SR4 100m Transceiver | Q2F19A |
HPE 100GbE QSFP28 SR4 Extended Temperature Pull Tab Transceiver | S2T35A |
HPE 100Gb QSFP28 LC SWDM4 Multi-mode 100m Transceiver | R0R40A |
HPE 100GbE QSFP28 500m 1310mm PSM4 Transceiver | Q8J73A |
HPE 100GbE QSFP28 to QSFP28 5m Active Optical Cable | Q9S71A |
HPE 100GbE QSFP28 to 4x25GbE SFP28 1m Direct Attach Copper Cable | Q9S72A |
HPE 100GbE QSFP28 LC DR1 500m 1-pack Transceiver | R8M61A |
HPE 100Gb QSFP28 to QSFP28 0.5m Direct Attach Copper Cable | R8M59A |
HPE 100GbE QSFP28 to QSFP28 Extended Temperature 5m Active Optical Cable | S2T38A |
HPE 100GbE QSFP28 to QSFP28 Extended Temperature 10m Active Optical Cable | S2T39A |
HPE 100GbE QSFP28 to QSFP28 Extended Temperature 15m Active Optical Cable | S2T40A |
HPE 100GbE QSFP28 to QSFP28 Extended Temperature 25m Active Optical Cable | S2T41A |
200G Transceivers and Cables |
|
HPE 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable | R5Z76A |
HPE 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable | R5Z77A |
HPE 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable | R5Z78A |
HPE 200Gb QSFP56 to QSFP56 2.5m Direct Attach Copper Cable | R5Z79A |
HPE 200Gb QSFP56 to QSFP56 5m Active Optical Cable | R5Z80A |
HPE 200Gb QSFP56 to QSFP56 10m Active Optical Cable | R5Z81A |
HPE 200Gb QSFP56 to QSFP56 15m Active Optical Cable | R5Z82A |
HPE 200Gb QSFP56 MPO SR4 100m Transceiver | R5Z83A |
HPE 200Gb QSFP56 to 2x100Gb QSFP56 3m Active Optical Cable | R6F24A |
HPE 200Gb QSFP56 to 2x100Gb QSFP56 5m Active Optical Cable | R6F25A |
HPE 200Gb QSFP56 to 2x100Gb QSFP56 15m Active Optical Cable | R6F26A |
HPE 200Gb QSFP56 to 4×50/25Gb SFP56 2.5m Direct Attach Copper Cable | R6F27A |
Description | SKU |
HPE 200GbE QSFP56 to 2xQSFP56 2m Direct Attach Copper Cable | R8M57A |
HPE 200GbE QSFP56 to 2xQSFP56 2.5m Direct Attach Copper Cable | R8M58A |
HPE 200Gb QSFP56 LC CWDM4 FR4 Transceiver | R5Z84A |
HPE 400GbE QSFP-DD to QSFP-DD 0.5m Direct Attach Copper Cable | R8M44A |
HPE 400GbE QSFP-DD to QSFP-DD 1m Direct Attach Copper Cable | R8M45A |
HPE 400GbE QSFP-DD to QSFP-DD 2m Direct Attach Copper Cable | R8M46A |
HPE 400GbE QSFP-DD to 2xQSFP56 1m Direct Attach Copper Cable | R8M51A |
HPE 400GbE QSFP-DD to 2xQSFP56 2m Direct Attach Copper Cable | R8M52A |
HPE 400GbE QSFP-DD to 4xQSFP28 1m Direct Attach Copper Cable | R8M55A |
HPE 400GbE QSFP-DD to 4xQSFP28 2m Direct Attach Copper Cable | R8M56A |
HPE 400GbE QSFP-DD to 8xSFP56 2m Direct Attach Copper Cable | R8M53A |
HPE 400GbE QSFP-DD to 8xSFP56 2.5m Direct Attach Copper Cable | R8M54A |
HPE 400GbE QSFP-DD to QSFP-DD 5m Active Optical Cable | R8M47A |
HPE 400GbE QSFP-DD to QSFP-DD 15m Active Optical Cable | R8M48A |
HPE 400GbE QSFP-DD to 2xQSFP56 5m Active Optical Cable | R8M49A |
HPE 400GbE QSFP-DD to 2xQSFP56 15m Active Optical Cable | R8M50A |
HPE 400GbE QSFP-DD MPO DR4 500m Transceiver | R8M60A |
HPE 400GbE QSFP-DD MPO BD/SR4.2 100m Transceiver | R8M62A |
HPE 400GbE QSFP-DD MPO SR8 100m Transceiver | R8M63A |
HPE 400GbE QSFP-DD LC FR4 2km Transceiver | R8M64A |
Technical Specifications
HPE 10GBase-T SFP+ RJ45 30m Transceiver (R0R41B) A 10-Gigabit transceiver in SFP+ form-factor that supports 10GBase-T Links up to 30m using Cat6a Cable. Low power consumption. 1.5W max. | ||
Connectivity | Connector type | RJ45 using Cat6a Cable |
Wavelength |
| |
Physical characteristics | Dimensions | 2.19(d) x 0.54(w) x 0.47(h) in. (55.7 x 13.8 x 11.9 cm) |
Environment | Weight | 0.1 lb. (50 g) |
Transceiver form factor | SFP+ | |
Operating temperature | 32ºF to 158ºF (0ºC to 70ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating/Storage temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | active |
Power consumption Maximum | 1.5 | |
Cabling | Cable type | Cat6a |
Cable length | 30 meter | |
Fiber type |
| |
Services | For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
HPE 10GBase-T SFP+ RJ45 30m Transceiver (R0R41A) A 10-Gigabit transceiver in SFP+ form-factor that supports 10GBase-T Links up to 30m using Cat6a Cable. Low power consumption. 1.8W max. *Replaced by R0R41B | ||
Ports | 1 10GbE SFP+ port | |
Connectivity | Connector type | RJ45 using Cat6a Cable |
Wavelength |
| |
Physical characteristics | Dimensions | 2.19(d) x 0.54(w) x 0.47(h) in. (55.7 x 13.8 x 11.9 cm) |
Environment | Weight | 0.1 lb. (50 g) |
Transceiver form factor | SFP+ | |
Operating temperature | 32ºF to 158ºF (0ºC to 70ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating/Storage temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | active |
Power consumption Maximum | 1.8w | |
Cabling | Cable type | Cat6a |
Cable length | 30 meter | |
Fiber type |
| |
Services | For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
HPE 10Gb SFP+ SR 300m Transceiver (Q6M30A) A 10-Gigabit transceiver in SFP+ form-factor that supports the SR standard, providing 10-Gigabit connectivity up to 300m on multi-mode fiber. Up to 300m (OM3); up to 375m (OM4). . |
Ports | 1 10-GbE port | |
Connectivity | Connectivity Connector type | LC |
Wavelength | 850 nm | |
Physical characteristics | Dimensions | -2.19(d) x 0.54(w) x 0.47(h) in. (55.7 x 13.8 x 11.9 cm) |
Environment | Weight | 0.04 lb. (20 g) |
Transceiver form factor | SFP+ | |
Operating temperature | 32ºF to 158ºF (0ºC to 70ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | 0.5w |
Power consumption Maximum | 1.0w | |
Cabling | Cable Type | OM3, OM4. |
Cable length | Up to 300m (OM3), up to 375m (OM4) | |
Fiber type | Multi-Mode | |
Notes: – For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. – Angled Physical Contact (APC) is not recommended. | ||
Services | For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
HPE 25Gb SFP28 SR 100m Transceiver (Q2P64A) A 25-Gigabit transceiver in SFP28 form-factor that supports the SR standard, providing 25-Gigabit connectivity up to 100m on multi-mode fiber. Up to 70m (OM3); up to 100m (OM4). |
Ports | 1 25-GbE port | |
Connectivity | Connectivity Connector type | LC |
Wavelength | 850 nm | |
Physical characteristics | Dimensions | 2.19(d) x 0.54(w) x 0.47(h) in. (55.7 x 13.8 x 11.9 cm) |
Environment | Weight | 0.04 lb. (20 g) |
Transceiver form factor | SFP28 | |
Operating temperature | 32ºF to 158ºF (0ºC to 85ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | 0.7w |
Power consumption Maximum | 0.8w | |
Cabling | Cable Type | OM3, OM4 |
Cable length | Up to 70m (OM3), up to 100m (OM4) | |
Fiber type | Multi-Mode | |
Notes: For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended. | ||
Services | For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
HPE 40Gb QSFP+ MPO SR4 100m Transceiver (Q7F11A) A 40-Gigabit transceiver in QSFP+ form-factor that supports the 4×10-Gigabit SR standard, providing 40-Gigabit connectivity up to 100m with multi-mode fiber . |
Ports | 1 40-GbE port | |
Connectivity | Connector type | MPO |
Wavelength | 850 nm | |
Physical characteristics | Dimensions | 0.72 x 2.86 x 0.33 in. (18.35 x 72.7 x 8.5 mm) |
Environment | Weight | 0.08 lb. (36 g) |
Transceiver form factor | QSFP+ | |
Operating temperature | 32ºF to 158ºF (0ºC to 70ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating/Storage temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | 2.3 w |
Power consumption Maximum | 2.5 w | |
Cabling | Cable type | OM3, OM4 |
Cable length | Up to 70m (OM3), up to 100m OM4 | |
Fiber type | Multi-Mode | |
Notes: – Conditioning patch cord cables are not supported. – For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. – Angled Physical Contact (APC) is not recommended. | ||
Services | For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
HPE 100Gb QSFP28 MPO SR4 100m Transceiver (Q2F19A) A 100-Gigabit transceiver in QSFP28 form-factor that supports the 4×25-Gigabit SR4 standard, providing 100-Gigabit connectivity up to 100m on using standard MPO connector with multi-mode fiber. Each channel/fiber operates at signaling rates up to 25.78125 GBd |
Ports | 1 100-GbE port | |
Connectivity | Connector type | MPO |
Wavelength | 850 nm | |
Physical characteristics | Dimensions | 0.72 x 2.86 x 0.33 in. (18.35 x 72.7 x 8.5 mm) |
Environment | Weight | 0.08 lb. (36 g) |
Transceiver form factor | QSFP28 | |
Operating temperature | 32ºF to 158ºF (0ºC to 70ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating/Storage temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | 2.3 w |
Power consumption maximum | 2.5 w | |
Cabling | Cable type | OM3, OM4 |
Cable length | Up to 70m (OM3), up to 100m (OM4) | |
Fiber type | Multi-Mode | |
Notes: – Conditioning patch cord cables are not supported. – For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. – Angled Physical Contact (APC) is not recommended. | ||
Services | For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
HPE 100GbE QSFP28 SR4 Extended Temperature Pull Tab Transceiver (S2T35A) A 100-Gigabit transceiver in QSFP28 form-factor that supports the 4×25-Gigabit SR4 standard, providing 100-Gigabit connectivity up to 100m on using standard MPO connector with multi-mode fiber. Each channel/fiber operates at signaling rates up to 25.78125 GBd |
Ports | 1 100-GbE port | |
Connectivity | Connector type | MPO |
Wavelength | 850 nm | |
Physical characteristics | Dimensions | 0.72 x 2.86 x 0.33 in. (18.35 x 72.7 x 8.5 mm) |
Environment | Weight | 0.08 lb. (36 g) |
Transceiver form factor | QSFP28 | |
Operating temperature | 32ºF to 185ºF (0ºC to 85ºC) | |
Operating relative humidity | 5% to 85%, noncondensing | |
Non-operating/Storage temperature | -4ºF to 185ºF (-40ºC to 85ºC) | |
Altitude | Up to 10,000 ft. (3 km) | |
Electrical characteristics | Power consumption typical | 2.3 w |
Power consumption maximum | 2.5 w | |
Cabling | Cable type | OM3, OM4 |
Cable length | Up to 70m (OM3), up to 100m (OM4) | |
Fiber type | Multi-Mode | |